Connecting to a Visualiser. To run MagicQ PC and a Visualiser on two different systems then you need to ensure that both systems have their IP address and Subnet Address set up to be on the same network range – e. Thanks for your help. You need a license of Wysiwyg to use it. It is a ready made project and you don’t need to install the Capture software itself. Any help on this would be very welcome and thanks in advance.
|Date Added:||27 October 2006|
|File Size:||13.78 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Thanks for your help. This will download the Patch information from Capture to MagicQ. Your information and time and effort is very much appreciated.
Magic-Q and WYSIWYG 22 – Blue Room technical forum
Users browsing this forum: But there is a big chmasys in price. CITP is an open protocol specific to Capture which enables both control of lighting and the transfer of the show patch between MagicQ and Capture. Download Capture exe-demo file chamsts have fun! MagicQ uses a fields in the personality to specify the Capture manufacturer name Make and Capture moving light name. Receiving Patch Data from Capture. To run MagicQ PC and a Visualiser on two different systems then you need to ensure that both systems have their IP address and Subnet Address set up to be on the same network range – e.
I am on the cast website now and downloading the demo but as yet I have no idea of what the cost is. When performing an Auto Patch, MagicQ will report any fixtures that it can not match. Grateful for your help please. Simply set the required universes to Out Type of ArtNet and enable them.
You need a license of Wysiwyg to use it. On reading the manual to interface both it says open Magic Q – ”Start up MagicQ PC – you should see the initial screen requesting whether you wish to continue you the existing show, load a new show, or cgamsys help. The simplest way to connect is using the Art-Net protocol in the same way as you would connect to Art-Net to DMX interfaces — most Visualisers now support it.
ChamSys MagicQ User Manual: Enabling Magicq To Output Wysiwyg Data
ESP vision supports ArtNet control. Note that when receiving patch data from Capture along with fixtures having DMX addresses set in Capture, the channel number must also be set in Chamsyw. This part is not updated yet in the manual.
So I really am at the start and guess what, a problem already. It runs on his own and can be linked with MagicQ. This ensures the patch can be transferred correctly to the console. When setting this up Chammsys definately think a visualiser would be of huge benefit.
You will see a list of the 64 universes and their current configuration.
ChamSys Forum • View topic – Magic Q & WYSIWYG
Check that the network ports on the two PCs are configured to the same IP subnet, that they are enabled, and that you have configured MagicQ to use the correct network port Setup, View Settings, IP address. MagicQ supports transfer of patch and fixture selection information to and from Visualisers.
The information has wysiwgy great and allowed me to get to a point to ask another question please. A cheaper alternative is Capture Polar. Now you need to configure the outputs. It does not install Wysiwyg! Using MagicQ with other Visualisers.
Some people like more Wysiwyg, others like more Capture Polar. Also, When watching a tutorial for visualisation there is a shortcut on the desktop to open it. It is a ready made project and you don’t need to install the Capture software itself.